In the drive to get the comfort and perfect vision, it is necessary to setting the right light. tool is needed just use a small screwdriver and a wall plus as a target light. To get optimal results, should be a dark place or at night.
The steps that bring the car into the wall and make the line as a sign of light parallel to the height of the top. After the car was pushed back about 10 meters, turned on the lights. Ideally, the upper limit of the lights should be on the line.
To try to point the light right straight to light the fire. The goal is to prevent other road users in the opposite direction does not glare. Meanwhile, to be directed a little left out, about 5 degrees to a wider light beam to see the side of the street or sidewalk.
how to set
Location of vertical and horizontal position control is behind the headlights, precisely on either side of the bulb hole. There is surrounded by a plastic screw that is almost full circle.
To arrange to use a Phillips screwdriver. Enter from the side of an open circle.
The steps that bring the car into the wall and make the line as a sign of light parallel to the height of the top. After the car was pushed back about 10 meters, turned on the lights. Ideally, the upper limit of the lights should be on the line.
To try to point the light right straight to light the fire. The goal is to prevent other road users in the opposite direction does not glare. Meanwhile, to be directed a little left out, about 5 degrees to a wider light beam to see the side of the street or sidewalk.
how to set
Location of vertical and horizontal position control is behind the headlights, precisely on either side of the bulb hole. There is surrounded by a plastic screw that is almost full circle.
To arrange to use a Phillips screwdriver. Enter from the side of an open circle.
0 komentar:
Posting Komentar